Welcome to TSX Screen!

Tel

+8616600250766

WhatsApp

+8616600250766

ML1200 Gear Oil Pump (GPY-3 Series) | TSX Screen

The GPY-3 series gear oil pump (GPY-3.001-CC10-4-5) is the heart of the ML1200 vibrating centrifuge lubrication unit. It delivers a steady oil stream to the main bearings and differential gearbox under high pressure, keeping the machine safe to run at full speed. TSX Screen supplies this pump as a genuine spare for ML1200 centrifuge owners.

Oil pump unit for ML1200 vibrating centrifuge lubrication system

Technical Specifications

Item Specification
Pump model GPY-3.001-CC10-4-5 (GPY-3 series)
Theoretical displacement 2.94 cm³/rev
Speed range 700 – 3000 rpm
Rated pressure 20.6 MPa
Theoretical flow Q = 2.94 × rpm / 1000 L/min (≈8.82 L/min at 3000 rpm)

Signs the Oil Pump Needs Replacement

  • Lubrication pressure gauge reading below the normal band at operating speed.
  • Bearing temperature climbing without a load change — often the first sign of oil starvation.
  • Visible leakage from the pump shaft seal or abnormal pump noise.

FAQ

Can I buy the pump separately from the lubrication unit?

Yes, the pump is supplied as a single spare part. See also the ML1200 oil filter that protects it.

What speed should the pump run at?

It follows your machine's setup; at 3000 rpm the theoretical flow is about 8.82 L/min. Send us your centrifuge model and we will confirm the matching configuration.

Request a Quote for the GPY-3 Oil Pump

Send us your centrifuge model and quantity — our engineers will confirm the fit and quote factory-direct prices within 24 hours.

Contact TSX Screen for a Quote →

TSX Screen is a vibrating screen manufacturer and mining screen supplier based in China, producing screens, centrifuges and genuine spare parts for coal preparation and mineral processing plants worldwide. See also our centrifuge spare parts range.

No:87405

Leave Your Message