Vibrating Screen Manufacturer for Mining and Mineral Processing | TSX Screen - Mining Screen Supplier
Vibrating Screen Manufacturer for Mining and Mineral Processing
TSX Screen supplies vibrating screens and screening equipment for mining, quarrying and mineral processing applications. Share your material, capacity, feed size, cut point and destination so our engineers can recommend a suitable screening solution.
Vibrating Screen Solutions
Vibrating Screens
Explore vibrating screen types for material classification and separation.
Screen Media and Panels
Review screen media and panels for wear, aperture and application requirements.
Mining and Mineral Processing Equipment
See the screen equipment range, including vibrating screens, exciters and related processing equipment.
Why Choose TSX Screen?
Factory and Engineering Capacity
TSX Screen presents a 9,000 m²+ cover-area signal and engineering support for international screening projects. Final production capacity and delivery schedule should be confirmed against the equipment model, duty and order quantity.
International Project Experience
The site documents projects and customer relationships in Australia, Mongolia and other international markets. Comparable references and application details can be reviewed for qualified enquiries.
Quality Control
TSX Screen operates under an ISO 9001:2015 certified quality management system and applies quality control to screening equipment. Final material, vibration parameters, wear parts, inspection documents and acceptance criteria should be confirmed in the technical quotation.
Application Support
For a correct recommendation, provide feed material, moisture, feed size, required cut point, capacity, operating hours, installation environment and power standard.
Vibrating Screen Types and Specifications
TSX Screen manufactures vibrating screens for classification, dewatering, scalping and grading duties. The table below summarises the main machine types we supply; deck number, screening area, aperture and vibration parameters are confirmed against the duty after the application data is reviewed.
| Machine Type | Typical Duty | Typical Configuration |
|---|---|---|
| Linear vibrating screen | Dry classification and grading of ore, aggregate and coal | 1–3 decks, 1,200–2,400 mm width, 3,000–6,000 mm length |
| Circular vibrating screen | Inclined screening where a tumbling motion aids stratification | 1–4 decks, inclined installation, 10–25° slope |
| High-frequency screen | Fine and wet classification, tailings and desliming duties | Multi-deck units with smaller amplitude and higher frequency |
| Banana screen | High-capacity scalping and product sizing in minerals plants | Multi-slope deck, increased screening area in the same footprint |
| Dewatering screen | Tailings, sand and product dewatering before stockpiling | Single or double deck with polyurethane panels and discharge lip |
Drive arrangement, screen frame material, wear protection and discharge arrangement are specified per application. Final machine selection and capacity should be confirmed in the technical quotation rather than from the table above alone.
Screen Media and Panel Specification
Screen media choice drives both screening efficiency and the cost per tonne processed. We supply the four main media families so that a single machine can be matched to the duty:
| Screen Media | Typical Aperture | Best For |
|---|---|---|
| Polyurethane panels | 0.5–30 mm | Wet and abrasive duties; long wear life, lower noise |
| Steel woven mesh | 1–100 mm | Dry screening with a precise cut point; high open area |
| Perforated plate | 5–150 mm | Heavy scalping and high-impact feed points |
| Rubber panels | 10–100 mm | Coarse, high-impact duties where noise and wear matter |
Aperture, panel thickness, fixing system and edge construction are matched to the machine frame and to the feed material. Screen media and spare wear parts can be supplied together with the equipment or as a repeat supply afterwards.
Applications
- Gold and precious metal ore: sizing and dewatering ahead of leaching, CIP/CIL and concentration circuits.
- Copper, iron and polymetallic ore: crushing circuit scalping, closed-circuit classification and product sizing.
- Quarry and aggregate: multi-deck grading of crushed stone, sand and manufactured aggregate.
- Coal and coke: sized coal preparation, desliming and dewatering before shipping or blending.
- Sand and industrial minerals: silica sand, feldspar and similar products requiring tight cut points.
- Tailings and environmental duties: dewatering and recovery where water management drives the flowsheet.
Export, Spare Parts and Engineering Support
TSX Screen supplies screening equipment and screen media to overseas mining operations, mineral processing plants, quarry operators and equipment distributors. Machines are exported with the documentation set agreed in the contract, and wear parts such as polyurethane panels, woven mesh and perforated plate can be re-ordered as a repeat supply.
- Scope supply: single machines, complete screening sections or a selection of machines for one flowsheet.
- Spare parts and wear media: panels, mesh, perforated plate, exciters, springs and drive components supplied as a separate order, which is useful where an existing plant needs a second source of wear parts.
- Distributor and OEM supply: equipment and screen media can be supplied to distributors, and private-label or OEM arrangements can be discussed for repeat programmes.
- Lead time: equipment is typically quoted at about 10 weeks and spare parts such as screen panels at about 6 weeks, both depending on the confirmed configuration and order quantity.
- Payment terms: 50% T/T deposit with the 50% balance, or irrevocable L/C at sight, as agreed in the contract.
- Technical enquiry: send the feed material, moisture, feed size, required cut point, capacity in tonnes per hour, operating hours, installation environment, power standard and destination so that a machine can be recommended with the correct screening area.
Typical export markets for the mining equipment line include Kazakhstan, Mongolia, Indonesia, Turkey and Mali, alongside other mineral producing regions. As a China-based vibrating screen and screen panel exporter we supply wholesale and bulk order quantities to distributors and processing plants as well as single machines to individual projects, and OEM or ODM arrangements can be discussed for repeat programmes. Prices depend on the machine size and configuration, so a quotation is prepared against your application data rather than a catalogue list price.
Vibrating Screen FAQ
What information is needed to select a vibrating screen?
Please provide material type, moisture, feed size, capacity, separation size, number of decks, operating hours, installation environment and destination.
Can the screen be customized?
Equipment configuration can be reviewed for deck number, screening area, aperture, vibration parameters, material, wear protection, feeding and discharge arrangement. Drawings and operating data help us confirm the design.
What is the delivery time?
Delivery time depends on model, configuration, production schedule, inspection and shipping route. The confirmed lead time will be stated in the quotation.
What is the MOQ?
MOQ depends on the equipment type and project requirement. Send the required equipment list and quantity so we can confirm the applicable order terms.
How do I request a quotation?
Use the Contact TSX page and include material, capacity, feed size, cut point, destination and target delivery date. We will review the application before preparing a quotation.
What is the typical delivery time for equipment and spare parts?
Equipment is typically delivered in about 10 weeks and spare parts such as screen panels in about 6 weeks, both depending on the confirmed configuration and order quantity. The confirmed schedule is stated in the quotation.
Do you supply spare parts and screen media separately?
Yes. Polyurethane panels, steel woven mesh, perforated plate, exciters, springs and drive components can be supplied as a repeat order, which is useful where an existing plant needs a second source of wear parts.
Can you supply as an OEM or to a distributor?
Equipment and screen media can be supplied to distributors, and private-label or OEM arrangements can be discussed for repeat supply programmes. Send the models and annual quantities to discuss terms.
