Trusted by leading mining companies worldwide




Our Product Range

1-High Frequency Screens
High-frequency screens are primarily used for grading and dehydrating fine or microscopic materials, as well as for coal slime recovery. They are particularly well-suited for dehydrating coal slimes before plate and frame filter press systems. These high-frequency screens are high-efficiency linear vibrating screens with two angled screen surfaces. They are optimized using the principles of linear screening and linear vibration theory. The excitation force is directly supplied by two vibrating motors mounted on the excitation beam, reliably and smoothly transmitting both power and linear vibration force. This allows the screen to vibrate the material at a predetermined frequency, from the feed end to the discharge end, and dehydrate the material as it passes through the screen surface.
- It is suitable for dehydrating coal foam and coal slime in coal mines, and can also be used for dehydrating non-coal fine sand. The feed particle size is less than 5mm.
- The sieve plate can be made of polyurethane frame stainless steel slotted sieve plate or full polyurethane slotted sieve plate
- ZDQ series vibration exciter or vibration motor

2-Banana Screens
The Banana Vibrating Screen is a linear vibrating screen featuring a box-type vibrator and multiple screen sections with varying inclinations. The screen box is shaped like a banana. It is primarily used for sizing large and medium-sized materials with a high fines content (fines are defined as particles less than half the screen opening size). It features a simple structure, stable production performance, smooth operation, and easy repair, maintenance, inspection, and operation. By utilizing multiple screen sections with varying inclinations to achieve uniform feed thickness across the screen, the Banana Vibrating Screen offers extremely high screening efficiency and a throughput 1.5-2 times greater than traditional grading screens.
- Suitable for particle size classification of large and medium-sized coal and non-coal materials with high fine particle content (fine particles refer to particles with a particle size less than half of the sieve hole size), feed particle size 0mm-300mm
- Steel structure screen panels (including woven, slotted, punched, rod, elastic rod screen panels, etc.) and all-polyurethane screen panels (including slotted, punched screen panels, etc.)
- ZDQ series vibrator

3-Horizontal Screens
The linear vibrating screen’s motion trajectory is a straight line. Under the combined force of the excitation and the weight of the material, the material is thrown up on the screen surface and moves forward in a linear, hopping motion, thereby screening and grading the material. It can be used for automated operations in assembly lines. It features low energy consumption, high efficiency, a simple structure, easy maintenance, a fully enclosed structure, and zero dust emission. With a maximum screening size of 325 mesh, it can screen seven different sizes of material. It is suitable for screening sand and gravel in quarries and is also used for product grading and dewatering in industries such as coal preparation, mineral processing, building materials, power generation, and chemicals.
- It is suitable for the particle size classification of large and medium-sized coal and non-coal materials with high fine particle content (fine particles refer to particles with a particle size less than half of the sieve hole size) and material dehydration and demediation. The feed particle size is 0mm-300mm.
- Steel structure screen panels (including woven, slotted, punched, rod, elastic rod screen panels, etc.) and all-polyurethane screen panels (including slotted, punched screen panels, etc.)
- ZDQ series vibrator

4-Circular Vibrating Screens
The circular vibrating screen, with its circular vibrating trajectory, is designed specifically for screening stone in quarries. It can also be used for product grading in sectors such as coal preparation, mineral processing, building materials, power generation, and the chemical industry. Its structure utilizes the RDQ series circular vibrator and offset blocks for amplitude adjustment. Its advanced rivet-connected, assembled frame structure extends its service life, while its spring damping reduces impact on the foundation. This multi-layer, high-efficiency new vibrating screen features an elliptical vibrating trajectory. The screen body vibrates in an elliptical trajectory through the circular vibrator, causing material to be thrown back onto the screen surface, improving screening efficiency.
- Suitable for primary and secondary classification of conventional materials, feed size 0mm-300mm
- The screen plate can be made of manganese steel, stainless steel, wear-resistant materials, etc., according to the size of the stone, such as punching screen plate, bar screen plate (large stone), woven screen plate
- RDQ series vibrator

5-Flip-flop Screens
During operation, the motor drives the vibrator installed on the main screen frame through the rotating device, and the vibrator drives the main screen frame to vibrate; at the same time, the main screen frame transmits the driving force to the floating screen frame through the rubber block, so that the floating screen frame also moves accordingly; since the elastic force provided by the rubber block lags behind the main screen frame by 180° phase angle, this will cause the floating frame and the main frame to move relative to each other, sometimes away from each other, and sometimes close to each other. In this way, the flexible screen plates installed at both ends on the floating screen frame and the active screen frame respectively produce a tension and relaxation movement, and the vibration intensity can reach 5G, which can generate 50G acceleration, thereby effectively solving the problem of blockage of the screen plate holes.
- Suitable for dry depth screening of sticky and difficult-to-screen materials with a graded particle size below 13mm, with a feed particle size of 0mm-50mm (including coal and non-coal materials)
- Fixed screen panels (including woven, slotted, punched, bar screen panels, etc.) and tensioned screen panels
- RDQ series vibrator or ZDQ series vibrator

6-Sieve Bends
The curved screen is a simple and efficient device for removing media, slime, and water. It has long been used in coal preparation plants abroad and is now widely used in domestic coal preparation plants for dehydration and sliming during material transfer. The curved screen is a fixed-slot screen with a specific radius of curvature and wrap angle, effectively improving slime water recovery.
- It is suitable for dehydration and demediation of foamed coal and coal slime in coal mines. It can also be used for dehydration of non-coal fine sand. The feed particle size is less than 5mm.
- Curved sieve plate
- Vibration motor

7-Vibrating Grizzly Feeder
Griddle feeders are used to uniformly feed bulk materials before the primary crusher. The grizzly screen also removes fine materials like dirt, achieving pre-screening and improving primary crushing capacity. They are particularly suitable for pre-crushing applications in the hydropower industry, building stone, and metal ores. They deliver bulk and granular materials from the storage bin to the receiving device in a uniform, timed, and continuous manner. In sand and gravel production lines, they provide continuous and uniform feeding of the crusher and provide coarse screening. They are widely used in combined crushing and screening equipment in industries such as metallurgy, coal mining, mineral processing, building materials, chemicals, and abrasives. Their operating principle is based on a pair of vibration motors with identical performance parameters acting as the excitation source. When the two motors rotate in opposite directions at the same angular velocity, the inertial forces generated by their eccentric masses overlap or cancel each other at specific phases. This generates a huge synthetic excitation force, forcing the machine body to vibrate on the supporting spring. This vibration is used as a driving force to drive the material to slide and throw on the trough, so that the material is continuously moved forward to achieve the purpose of feeding. When the material passes through the screen bars on the trough, smaller materials can fall through the gaps between the screen bars and avoid going through the next crushing process, thus achieving a screening effect.
- Suitable for pre-screening of large-size materials, feed size 30mm-1000mm
- The screen plate is made of steel structure bar screen plate (manganese steel, stainless steel, wear-resistant material, etc.)
- ZDQ series vibrator
Our Factory, Packaging and Shipping
Tianjin Production Base
Equipped with advanced CNC machines for high-precision component manufacturing, ensuring superior quality.
Dedicated Assembly Line
Our skilled technicians meticulously assemble each vibrating screen, adhering to strict quality control protocols.
Rigorous Packaging
Each device undergoes thorough testing in our dedicated quality control laboratory to ensure performance and reliability, and is then packaged and crated for shipping.
Safe Shipping
With our Last Mile Guarantee, your vibrating screen will be in the best hands from the loading dock to its final destination.”
What Our Clients Say
“TSX SCREEN significantly enhances ore processing efficiency while reducing energy consumption and maintenance costs. Their engineering team provided exceptional support throughout the installation.”
“Real-world testing shows improved ore processing efficiency and reduced downtime, aligning with their claims of optimized maintenance costs.”
“TSX SCREEN is particularly outstanding in its customized solutions for complex and sticky materials, which have been proven in the field.”
Get Your Custom Solution Today!
Fill out the form below to receive a personalized quote and expert consultation for your vibrating screen needs.