The TSX vibrating screen horizontal screen vibrator gets its name because of its linear shape. The level of the overall screen mesh is parallel to the ground or inclined 0-5 degrees. It is basically divided into one layer, two layers, and three layers. It is more suitable for those that do not need to be moved or can be moved at any time after installing the crawler. During use, because of the straight line, the material stays on the screen mesh for a long time, so that the material to be screened has enough time to fall from the screen mesh.
The banana screen vibrator is fixed on an inclined shelf at an angle of 15 to 30 degrees. The banana screen vibrator also usually has three layers, and more also has four layers. The main feature of the banana screen vibrator is that the angle can be adjusted to screen different materials according to requirements. The side panel of the banana screen vibrator has no welds and is made of a whole piece of steel panel.
The main function of a high-frequency screen vibrator is dehydration, which is usually used for pre-dehydration before screening, and the amplitude is small, which is more suitable for raw materials with high water content, which can improve the recovery rate of solid materials, and because of the small amplitude, it will not damage the foundation filter layer. The working principle of the high-frequency screen vibrator is to remove the water wrapped on the surface of the raw material through high-speed vibration.
This operation not only accelerates the density and separation of useful minerals, but also increases the possibility of smaller-sized separated materials coming into contact with the mesh. Thereby creating a better separation condition, making the material smaller than the separation particle size. Especially the material with high density is screened out through the screen holes together with the ore pulp. It can provide higher capacity and more effective size than traditional screening equipment.
