TSX company has a professional mining vibrating screen equipment monitoring system.
Vibrating screens are widely used, especially in coal preparation plants and mine sites, where coal can be dehydrated, foamed coal, non-coal fine sand can be dehydrated, and mud and medium can also be removed. As a vibrating screen, it must continue to operate. The speed, vibration frequency, load state, working time, etc. A good environment will also directly affect the use of the vibrating screen, so use it scientifically and rationally.
Vibrating screen condition detection is the core part of predictive maintenance technology for rotating equipment. Vibration monitoring is the most direct detection method with the widest detection range, usually as follows:
When the equipment is running, use a pen-type detector to detect the vibration speed of the equipment, measure the vibration speed of the equipment in the axial direction, vertical direction, and horizontal direction, if the value is found to be deviated, check whether the parts are loose, and use a simple diagnostic instrument. 50% of the failures were detected, obviously this is of great help to the detection of vibrating screens.
Accurate detection: Use the vibration spectrum detected by the vibration spectrum analyzer to analyze and find out the fault point.
Different waveforms may correspond to a fault category, which is very important for unbalanced, loose, etc. faults.
Two-way phase analysis, through the vibration signals of two road sections to identify the fault situation and find out the difference.
For the above detection methods available for vibrating screen failures, to avoid frequent occurrence of vibrating screen failures, it is necessary to detect and grasp the use of vibrating screens at any time, early detection and early repair, to avoid sudden shutdown of vibrating screens, and to ensure the status of vibrating screens. Detection and early warning are very important and of great significance.
