What Is The Operating Principle Of Coal Machine Vibrating Screen?

Regarding the TSX coal machine vibrating screen, there are many types: single-layer horizontal screen, double-layer horizontal screen, single-layer banana screen, double-layer horizontal flip screen (one layer of static screen + one layer of flip screen), three-layer banana flip-trigger Trigger screen (one static panel + two trigger panels), high frequency screen, etc.]

Operating Principle of  TSX coal machine vibrating screen:Taking ABS3661 single banana screen for example.

  1. Motor rotate and then the belt transmission is adjusted speed.
  2. Transfer exciting force to drive shaft by layshaft assembly.
  1. Provide exciting force by  the exciter running. The angle is 45° between direction of exciting force and horizontal plane.
  1. The linear vibrating force acts on the screen to vibrate by springs. The dynamic load of screen base support can be reduced by the springs.
  1. Transfer vibrating force  to materiel  by screen and slot panel are synchronous vibration. The materiel  moving forward, lamination and classification  according to granularity.
  2. The materiel were feed up and  classified continuously from the feed end to discharge end by slot panel, the materials below the screen surface were send to the groove of below deck, the materials above the screen surface were send to the groove of discharge end

This screen uses5 angles and 5 segments fold line screen deck, the screendeck angle of inclination from feed end to discharge end are 25°, 20°, 15°, 10°, 5°. In the effect of exciting force, materials form into the fluid coal when the continuous move forward on the screen surface to the discharge end. The bigger inclination of the screen surface the faster speed of materials.

This is Operating Principle of TSX coal machine vibrating screen ABS3661 single banana screen

TSX Screen

TSX Screen

Get a Quick Quote!


Error: Contact form not found.