Screen Deck 610 x 610 x 45 mm — 0.75 mm and 1.0 mm Polyurethane Panels
Polyurethane screen panels are the wear parts that keep a vibrating screen producing. TSX Screen manufactures a complete range of polyurethane screen panels and spare parts for fine screening and dewatering in coal preparation plants, ore dressing plants and aggregate quarries — including the standard screen deck 610 x 610 x 45 mm in 0.75 mm and 1.0 mm aperture, dam cross panels, impact panels and discharge end panels.
Our Polyurethane Screen Panel Range
- Polyurethane screen deck — flat 610 x 610 x 45 mm panels with 0.75 mm or 1.0 mm aperture, SS304 screen wire, for fine wet screening.
- Dam cross panel — same panel body with a 50 mm polyurethane dam that controls slurry flow and bed depth across the deck.
- Impact panel — full-polyurethane panel with a 45 mm impact zone, installed at the feed point to absorb material impact.
- Discharge end panel — 610 x 305 x 45 mm end panel with a 60 mm discharge lip for controlled solids discharge.
- Polyurethane screen rail — 6-hole and 8-hole support rails, Steel Q355 core with polyurethane cover (Shore A 90 ± 5), 18 mm fixing holes.
- Screen rail bolt (Huck type) — M16 x 50 galvanized lock bolt, carbon steel, vibration-proof rail and cross member fixing.
Technical Specifications
| Panel type | Size (mm) | Key specifications | Weight |
|---|---|---|---|
| Screen deck | 610 x 610 x 45 mm | Aperture 0.75 / 1.0 mm; polyurethane hardness Shore A 90±5; SS304 screen wire; frame tensile strength ≥ 30 MPa; wire tensile strength ≥ 520 MPa | 17.7 kg (0.75 mm) / 16.8 kg (1.0 mm) |
| Dam cross panel | 610 x 610 x 45 mm | Dam height 50 mm; material polyurethane + SS304; aperture 0.75 / 1.0 mm | 19 kg (0.75 mm) / 18 kg (1.0 mm) |
| Impact panel | 610 x 610 x 45 mm | Impact zone thickness 45 mm; material polyurethane | 25 kg |
| Discharge end panel | 610 x 305 x 45 mm | Discharge lip height 60 mm; material polyurethane | — |
Why Polyurethane Screen Panels
- Longer wear life — polyurethane resists abrasion far better than woven steel cloth in wet, fine-screening service, especially with abrasive slurry.
- Consistent apertures — moulded openings keep the cut accurate over the panel’s life, so product sizing stays stable.
- Less blinding — the flexible polyurethane surface and SS304 wire help near-size particles pass instead of pegging the deck.
- Lower noise — polyurethane panels run noticeably quieter than steel decks.
- Lighter panels — a 610 x 610 mm deck weighs about 17 kg, reducing the moving mass on the screen body.
OEM Fitment & Custom Panels
The panels shown here are the standard sizes used on TSX vibrating screens. We also manufacture polyurethane panels to customer drawings: other frame sizes, aperture profiles, dam heights, fixing systems and hook strips are all available. Custom mark numbers can be assigned for plant spare-part management.
FAQ
What aperture sizes are available for the 610 x 610 mm polyurethane screen deck?
Standard production covers 0.75 mm and 1.0 mm apertures. Other openings can be moulded to order — send us your separation size and we will confirm the aperture.
What wire is used in the screen mesh?
The screen wire is SS304 stainless steel with a tensile strength of at least 520 MPa; the surrounding frame is polyurethane with tensile strength of at least 30 MPa.
Do you supply panels for non-TSX screens?
Yes. Panels are moulded to the customer’s drawing or to a sample panel, so they fit most brands of vibrating screens and dewatering screens.
Request a Quote for Polyurethane Screen Panels
Send us your screen model, panel size and required aperture — our engineers will confirm the fit and quote factory-direct prices within 24 hours.
Contact TSX Screen for a Quote →
TSX Screen is a vibrating screen manufacturer and mining screen supplier based in China, producing screens, centrifuges and genuine spare parts for coal preparation and mineral processing plants worldwide. See also our screen applications & selection guide and FAQ.
